CONNECTING ANALOG AUDIO OUT JACKS TO A STEREO AMPLIFIER
STEREO AMPLIFIER
BACK VIEW OF DTV
1
Connect the DTV Audio Out (R/L) to the Stereo
Amplifier In (R/L).
2
Press POWER to turn on the DTV, then turn on
external equipment.
NOTE: Do not connect external speakers directly to the DTV.
1
REMOTE CONTROL
2
TYPICAL HOME THEATER CONNECTIONS
Position your DTV at least 2 feet from stereo speakers. The
magnets in the speakers may affect the picture quality.
Switch off DTV and external equipment before connecting
cables.
(Cables are not supplied.)
15
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
To Next Page
Loading...
