EasyManua.ls Logo

Sanyo DP42746 - FIRST-THINGS-FIRST (Required Initial Setup); Initial Signal Connections

Sanyo DP42746
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This Plasma television will reproduce a crystal clear Digital picture and exceptional sound.
The signal makes the difference!
1
INITIAL SIGNAL CONNECTIONS
Analog RF Antenna Connection
Connect a Cable signal (with or without a cable box),
Satellite Receiver, or RF antenna to the Analog RF
input.
The analog tuner in this Plasma DTV receives Analog
Antenna signals, Analog Cable signals, or the RF output
from a Satellite Receiver, VCR, or cable box.
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authori-
ties. To receive cable programs, even with equipment
which is capable of receiving cable channels, the con-
sumer must subscribe to the cable company’s service.
ANALOG CABLE
ANALOG RF
ANTENNA
ANALOG SATELLITE RECEIVER
VCR BACK
Digital (DTV) RF Antenna Connection
Connect an RF Antenna to the Digital Antenna In
terminal.
The digital tuner in this DTV receives HD signals from an
antenna. Digital signals from a Set-top Box (STB) are
received through the Component In jacks.
This DTV can receive ANY resolution being broadcast
(HDTV, EDTV, or SDTV). However, ALL resolutions are
converted to 1080i for display.
DIGITAL RF
ANTENNA
PLASMA TV BACK
FIRST-THINGS-FIRST (Required Initial Setup)
OR
VCR BACK
VCR BACK
PLASMA
DTV BACK
OR
PLASMA
DTV BACK
PLASMA
DTV BACK
Notes: If you do not have a VCR, connect signal directly to the TV 75
ohm terminal (UHF/VHF/CATV).
Don’t be fooled by the phrase Available in High-
Definition. The only resolution available with any of these
analog connections, regardless of the original content, is
standard analog (SDTV).
DIGITAL ANTENNA INPUT
DTV will select the correct Antenna mode for the type of
Analog RF signal connected automatically.
Use “Analog Antenna Signal” in the Setup menu to change
the Antenna Mode.
If you move the DTV to a new location, press the RESET
key twice after connecting the signal and turning on the
DTV.
7
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
(Continued on next page.)

Table of Contents

Other manuals for Sanyo DP42746

Related product manuals