EasyManua.ls Logo

Sanyo DP42746 - Features; Specifications

Sanyo DP42746
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42" Plasma HDTV Screen
RF Antenna Input Jacks: Digital and Analog
Built-in Digital and Analog Tuners
Receivable Formats: ATSC Digital Tuner for Terrestrial
Broadcasts and non-scrambled (ClearQAM) broadcasts,
NTSC Analog Tuner for VHF / UHF or CATV
Receives 181 Analog Channels (VHF 2~13 and UHF 14~69;
Cable TV 1, 14~125); and 99 Digital Channels
Automatic Channel Search
Channel Scan Memory
3-D Y/C Digital Comb Filter (for better picture detail)
V-Chip for Movies and TV Guidelines Rating Limits
(Parental Control)
Closed-Captioning: Analog EIA-608B and Digital EIA-708B
Audio Modes: TV—Main and Sub
NTSC—Stereo, Mono, and SAP
Tone
Picture Rotation (Screen Saver)
White Pattern (Panel Repair)
Audio Format: Dolby
®
Digital 5.1 for TV and Analog for NTSC
Front Speakers 6 x 12 cm (two)
Detachable TV Stand (Feet)
Trilingual Menu Options
Factory Preset Adjustments for Picture / Sound
Picture Shape: PIX1, PIX2, PIX3, and PIX4
Sleep Timer (3 hours)
HDMI (High-Definition Multimedia Interface) Input with
HDCP (High-bandwidth Digital Content Protection)
RF Antenna Input Jacks: Digital and Analog
Component Video Input (Two Sets)
Rear Composite AV Input
S-Video Input
Optical Digital Audio Out
Fixed Analog Audio Out
XDS (Extended Data Services) Displays Station Call Letters,
Title of Show, and Ratings when Broadcast
32-Key Remote Control
FEATURES
SPECIFICATIONS
Screen Size: 42 inches (Measured Diagonally)
Panel Type: Plasma HDTV Display
Aspect Ratio 16:9
Display area: 934 mm (W) x 532 mm (H)
Resolution: 1024 x 768 pixels
Color System: ATSC / NTSC
Scanning Format: 720p (RF signals are converted to 720p)
RF Antenna Input: Analog–UHF / VHF / CATV 75 ohm
Digital–75 ohm
Power Requirement: Source: AC 120V, 60Hz
Power Consumption: 351 Watts (Maximum)
Sound: Two Speakers, size: 6x12cm
Amplifier: Built-in with 5.0W/ch
Jacks and Connectors:
Video 1 Input: Composite Video and Audio L/R
S-Video
Video 2 Input: Component (Y/ Pb/Pr) with Audio L/R Input
Video 3 Input: Component (Y/ Pb/Pr) with Audio L/R Input
Digital Audio Output: Dolby
®
Digital (Optical)
Analog Audio Output: Audio L/R
HDMI Input: 19-pin connector
(Picture/Sound with HDCP)
Service Input Jacks: For Production use only
Size and Weight (approximately):
Horizontal Dim. (Width): 47.5 in. (1205.8 mm)
Vertical Dim. (Height): 28.2 in. (715.2 mm)
Depth Dim. (Thickness): 9.8 in. (248.3 mm)
Weight: 84.1 lbs. (38.2 Kg)
Environmental Considerations
Operating Temperature: 32°F ~ 140°F (0°C ~ 60°C)
Humidity: 20 ~ 80%
Storage Temperature: -4°F ~ 158°F (-20°C ~ 70°C)
Humidity: 5 ~ 95 %
Specifications are subject to change without notice.
CAUTION: FCC Regulations state that improper modifications or
unauthorized changes to this unit may void the
user’s authority to operate the unit.
Trademarks Information:
Manufactured under license from Dolby Laboratories.
Dolbyand the double-D symbol are trademarks of Dolby
Laboratories.
Contains iType™ from Monotype Imaging, Inc.
4
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
with a double “Z” is a registered trademark of
Sanyo Manufacturing Corporation.

Table of Contents

Other manuals for Sanyo DP42746

Related product manuals