Sanyo DP42746 - ANALOG ANTENNA SIGNAL (OPTIONAL)


ANALOG ANTENNA SIGNAL
(OPTIONAL)
Use this feature to switch between analog off-air
channels and analog cable channels.
1
Press the TUNER key to select analog channels.
2
Press the MENU key to display the Main menu.
3
Use the CURSOR  keys to highlight (green) the
Analog Antenna Signal . Press ENTER.
4
Use the CURSOR  keys to choose Cable or
VHF/ UHF . Press ENTER.
5
Press the EXIT key to return to normal TV viewing.
To delete channels from the Channel Scan Memory
3
Use the CHANNEL (CH ) keys or numerical
0 ~ 9 keys to select desired channel. HINT: Press the
TUNER key to switch between Digital and Analog
Channel Scan memories.
4
Press the ENTER key to delete the channel. The
display will change to “deleted.”
NOTES
“Delete?” will ap-
pear below the
channel number if
the selected chan-
nel is already in
the Channel Scan
Memory.
Use the number
keys to tune to
active channels not
in the Channel
Scan Memory list.
To Add a channel to the Channel Scan Memory
3
Use the numerical 0 ~ 9 keys to select the desired
channel number. “Add?” will appear below the
channel number.
4
Press the ENTER key to add the channel. The display
will change to “Added.”
When you have fin-
ished adding and/or
deleting channels,
press the EXIT key
to return to normal
TV viewing.
CHANNEL SCAN MEMORY
Channel Scan Memory is a list of active channels that
you can scan through using the Channel Scan CH  (up)
CH  (down) keys. This list can be customized by delet-
ing and/or adding channels.
1
Press the MENU key to display the Main menu.
2
Use the CURSOR  keys to highlight (green)
Channel Scan Memory . Press ENTER.
 When a digital channel is deleted, all of that channel’s sub-
channels are deleted as well.
 Only previously deleted digital channels can be added back
to the Channel Scan Memory.
 If one digital sub-channel is added back to the Channel Scan
Memory all of that channel’s sub-channels will be added back.
 If the last remaining digital channel is deleted, the entire previ-
ous Channel Scan Memory list will be restored automatically.
 If the last remaining analog channel is deleted (cable or off-air
channel), ALL analog channels (cable or off-air) will be
restored automatically, regardless of the previous Analog
Channel Scan Memory list.
20
Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032