Why no audio / video signal on the display device via HDMI cable from Sanyo FWBP506FF Blu-ray Player?
- JjoelramirezAug 28, 2025
If you're not getting any audio or video signal on your display device via HDMI cable with your Sanyo Blu-ray Player, it might be because the unit is connected to a non-certified HDMI device. Also, ensure the display device is on the correct Input / Video source. You can also perform an HDMI hotplug by disconnecting the HDMI cable from the display device, turning on both devices, and then replugging the HDMI cable back in. Check with the TV manufacturer for available software updates and verify that the HDMI cable is a certified version.



