18
CHANNEL RECALL
Press CHANNEL RECALL button to switch between
the previous channel and the current channel.
For example, now you are watching channel "4", but
you watched channel "2" previously. If you press
CHANNEL RECALL button, channel "2" will appear
immediately.
SELECTING INPUT SOURCE
Select mode "TV" , "AV1", "AV2-S", "AV3", "HDMI1", "HDMI2", "HDMI3", "HDMI4", "PC" or "USB"
by pressing INPUT button on Remote Control or on Side Controls, you can also press POINT ▲▼
buttons to select different mode. To enter the selected mode, press OK button or POINT ◄► buttons.
INPUT
: SELECT : EXIT
TV
2.
AV1
3.
AV2-S
4. AV3
5. HDMI1
6. HDMI2
7. HDMI3
8. HDMI4
9. PC
0. USB
1. TV
REMOTE CONTROL
SIDE CONTROLS
INPUT button
OK
INPUT button
Note:
●
It is possible to return to TV mode directly by pressing
CHANNEL UP/DOWN (▲▼) buttons from the AV mode, PC
mode or HDMI mode.
●
HDMI4 is only for model LCD-42K40/A-HD.
REMOTE CONTROL
CHANNEL
RECALL button
CHANNEL SELECTION
DIRECT SELECTION
There are 256 channels can be selected on the LCD TV.
For direct access to programmes using the (0-9) numeric buttons.
2)
For selection of channel position 10 - 99. Example:
For channel position 25, press the DIGIT
button to
display "- -", then press “2” and “5” buttons.
1) For selection of channel position 0 - 9. Example: For
channel position 8, press “8” button.
3)
For selection of channel position 100 - 199. Example:
For channel position 125, press the DIGIT button
twice to display "1 - -", then press “2” and “5” buttons.
CHANNEL UP/ DOWN
Press CHANNEL UP/DOWN (
▲▼
) buttons on Side Control or on Remote Control to select programs.
●
Press CHANNEL UP (▲) button to select next channel.
●
Press CHANNEL DOWN (▼) button to select previous channel.
4) For selection of channel position 200 - 255.
Example: For channel position 225, press the DIGIT
button three times to display "2 - -", then press “2”
and “5” buttons.
BASIC OPERATION
0~9
BACK
REMOTE CONTROL
CHANNEL UP/
DOWN (▲▼)
buttons
NUMERIC buttons
DIGIT button
LCD-K40.indd 18 1/21/2010 10:47:15 AM
To Next Page
Loading...
Need help?
General
