35
TIMER
TIMER MENU
1
2
Press MENU button and the main menu will appear.
Press POINT ◄► buttons to select TIMER.
Press POINT ▼ buttons to enter into TIMER menu.
Press POINT ▲▼ buttons to select the item desired.
■ Press BACK button to return to the previous menu.
■ Press MENU button or wait for 5~60 seconds (refer to
"DURATION" on page 36) to exit menu operation.
3
Note:
●
OFF TIMER and ON TIMER will be automatically cancelled
during searching channels.
●
The settings for OFF TIMER and ON TIMER will be automatically
cancelled after the settings has been operated for one time.
●
In case you left TV without any operation for 2 hours after power
on by ON timer, TV will automatically power off itself.
To set channel position, you can use NUMERIC buttons or DIGIT
button. (Please refer to "DIRECT SELECTION" on page 18.)
After ON TIMER has been set, ON TIMER INDICATOR will be
light.
ON TIMER
To cancel "ON TIMER MODE", you can choose any option by the
following ways.
-
Setting "00 : 00" in ON TIMER.
-
Disconnecting the AC power cord.
Once ON TIMER has been set, you won't miss any opportunity
to watch the program you like.
Press POINT ◄► buttons to enter the item selected.
4
Once OFF TIMER has been set, when the set time is reached,
the TV will shift to stand-by status.
OFF TIMER
To select "OFF", "30 MIN", "60 MIN", "90 MIN" or "120 MIN" with
POINT ▲▼ buttons or TIMER button.
To cancel "OFF TIMER ", you can choose any option by the following
ways.
-
Setting "OFF" in OFF TIMER menu.
-
Pressing POWER ON/OFF button on Side Control.
-
Pressing POWER ON/OFF button on Remote Control.
MENU OPERATION (TV/AV/HDMI mode)
TIMER
ON TIMER - - : - -
OFF TIMER
OFF
ON TIMER CH
16
SELECT
ADJUST
BACK EXIT
::
:
:
TIMER
ON TIMER - - : - -
OFF TIMER
OFF
ON TIMER CH
16
SELECT
ADJUST
BACK EXIT
::
:
:
TIMER
ON TIMER 12 : 30
OFF TIMER
OFF
ON TIMER CH
16
SELECT
ADJUST
BACK EXIT
::
:
:
0~9
TIMER
ON TIMER - - : - -
OFF TIMER
OFF
ON TIMER CH
16
SELECT
ADJUST
BACK EXIT
::
:
:
0~9
ON TIMER CH
This function is only active that ON TIMER has been set. When
the set time in ON TIMER is reach, the TV will turn on and enter
the channel position you set directly .
To set channel position, you can use NUMERIC buttons or DIGIT
button. (Please refer to "DIRECT SELECTION" on page 18.)
LCD-K40.indd 35 1/21/2010 10:47:27 AM
To Next Page
Loading...
Need help?
General
