CAUTION
Connect power cord of the product
to its own dedicated outlet.
Nothing should be placed on the
power cord.
Do not use staples or nails to anchor
the power cord.
Be sure to wear thermally insulated leather gloves.
Note that it takes time until liquid is cooled down.
Handling a sterilized object with bare bands immediately
after the end of operation may result in burns.
Failure to observe this caution may result in electric
shock.
Connect the power cord to a dedicated outlet as
shown below.
<MLS-3751>: Single phase, 100V AC, 20A or higher
<MLS-3781>: Single phase, 200V AC, 20A or higher
Failure to observe this caution may result in ignition or
malfunctioning.
Set the power switch to OFF and sufficiently
cool the product before performing maintenance.
Failure to observe this warning may result in electric
shock or burns.
Before performing maintenance, set
the power switch to the OFF position.
Do not touch the power switch with
wet hands.
Failure to observe this caution may overheat the power
cord, resulting in fire.
Use care not to scald yourself when
taking out the sterilized objects at the
end of operation.
Failure to observe this caution may overheat the power
cord, resulting in fire.
Black: AC
Black: AC
Yellow/Green
:
Grounding wire
Set power
switch to
OFF
.
To Next Page
Loading...
Need help?
General
