Sanyo MLS-3751 User Manual

Basic operating procedure
Reference
page
4. Equipment sterilization
cycle
3. Melting/Heat-
retention cycle
2. Sterilization/Heat-
retention cycle
1. Liquid sterilization
cycle
1. Install the exhaust tank.
2. Set the power switch to ON.
3. Open the cover.
4. Pour the heating water.
5. Place sterilization objects inside.
6. Close the cover.
7.
Press the cycle/program selector button.
8. Change the settings
(for program operation).
9. Press the start button.
Sterilization/Melting
Heat-retention
10. Operation is completed.
11. Open the cover.
12. Take out the sterilization objects.
13. Set the power switch to OFF.
14. Drain off the heating water
(for program operation).
15
16
16
17
17
17
18
19
24
20
21
21
22
22
22
24
SterilizationSterilization
14
How to Use

Sanyo MLS-3751 Specifications

General

Brand	Sanyo
Model	MLS-3751
Category	Laboratory Equipment
Language	English