Sanyo PDG-DHT100L - Connecting to Video Equipment

21
Installation
Connecting to Video Equipment
Video Source (example)
Video Cassette Recorder DVD Player
RGB SCART
21-pin Output
Y
Pb/Cb Pr/Cr
Y-Pb/Cb-Pr/Cr
Component video output equipment.
(such as DVD player or
high-definition TV source.)
Component Video Output
BNC
Cable
DVI
Cable
SCART-VGA
Cable
DIGITAL
Unplug the power cords of both the
projector and external equipment from
the AC outlet before connecting cables.
S-Video
Output
S-VIDEO
Cables used for connection
• Video Cable (BNC x 3, BNC x 1)
• SCART-VGA Cable
• DVI Cable
• S-Video Cable
• HDMI Cable
( Cables are not supplied with the
projector.)
Composite
Video
Output
S-Video
Cable
VIDEO ANALOG
Terminals of
the projector
BNC
Cable
Digital
Output
(HDCP
compatible)
HDMI
Output
HDMI
Cable
HDMI
Input Terminal Monitor Out Cable
Input 1
D-sub15
RGB (PC analog) YES
RGB (SCART) NO
DVI-D
RGB (PC digital) NO
RGB (AV HDCP) NO
HDMI
HDMI NO
Input 2
5BNC
RGB YES
Video YES
Q
Y-Pb/Cb-Pr/Cr YES
Q
S-video
S-video NO
Monitor Out Signal Table
Q
A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is
necessary.
MONITOR
OUT
Refer to the
Monitor Out
Signal Table
(above).