7 INPUT Press “INPUT” to choose RGB,
Component, S-Video and Composite
sources.
8 MENU Press “MENU” to launch the On-
screen display (OSD), back to the top
level of OSD for the OSD main menu
operation
9 KEYSTONE - Adjust the image to compensate for
distortion caused by tilting the projec-
tor.
10 AV-MUTE Momentarily turn off/on the audio
and video.
11 RESET Return the adjustments and settings
to the factory default values. (except
for lamp counter)
12 S-VIDEO Press “S-VIDEO” to choose S-Video in
connector.
13 VIDEO Press “VIDEO” to choose Video in
connector.
14 KEYSTONE + Adjust the image to compensate for
distortion caused by tilting the projec-
tor.
15 D.ZOOM Zoom out or Zoom in the projector
display.
16 Four
Directional
Select Keys
Use or or or to select items or
make adjustments to your selection.
17 AUTO ADJ. Automatically synchronize the projec-
tor to the input source.
18 INPUT
SEARCH
This function detects the input signal
automatically. When nding a signal,
the search will stop. (See page 23 and
30)
19 VOLUME +/- Increase/decrease speaker volume.
To Next Page
Loading...
