Command Function Command Function
C00
POWER ON
C30
D.zoom +
C01
POWER OFF
(Immediate POWER OFF)
C31
D.zoom -
C3A
POINTER RIGHT
C05
Computer
C3B
POINTER LEFT
C09
Volume +
C3C
POINTER UP
C0A
Volume -
C3D
POINTER DOWN
C0B
SOUND MUTE ON
C33
VIDEO
C0C
SOUND MUTE OFF
C34
S-VIDEO
C0D
AV MUTE ON
C43
FREEZE ON
C0E
AV MUTE OFF
C44
FREEZE OFF
C0F
Aspect 4:3
C89
AUTO ADJ.
C10
Aspect 16:9-I
C8E
KEYSTONE +
C11
Image mode Presentation
C8F
KEYSTONE -
C12
Image mode Movie
C13
Image mode sRGB
C14
Image mode Bright
C15
Image mode User 1
C16
Image mode User 2
C17
Image mode Classroom
C18
Image mode Blackboard
Functional Execution Command
Format
The command is sent from PC to the projector with the format below;
‘C’ [Command] ‘CR’
Command: two characters (refer to the command table below.
■ The projector decodes the command and returns the ‘ACK’ with
the format below;
‘ACK’ ‘CR’
■ When the projector cannot decode the command, it returns with
format below.
‘?’ ‘CR’ projector and serial port on the PC.
To Next Page
Loading...
