Sanyo PDG-DXL2000 - Page 19

-19-
Mechanical Disassembly
Fig.7
Main and AV board
assy
m Main, AV Board and Fans (FN901, FN906) removal-1
1. Remove 1 screw A(M3x6) to remove the Temp. sensor 1 board.
2. Remove 6 screws B(M3x12) to remove the Main and AV board assy.
A
B
B
B
B
B
B
Temp sensor 1 board
(M3x6)x2
(M3x10)x2
FN901
FN906
(M3x6)x2
(M3x28)x2
Fan Duct
Label side