Sanyo PDG-DXL2000 - Mechanical Disassembly

-13-
z Cabinet Top removal
Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical
order.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the origi-
nal otherwise it may cause loss of performance and product safety.
Screws Expression
(Type Diameter x Length) mm
T type M Type
Fig.1
1. Remove 8 screws A(M3x8) to remove the cabinet top assy upward
off.
RC Window
Cabinet top assy
A
A
A
A
A
A
A
A
Lamp cover
Control buttons
Key sw board
Glass holder
Optical
filter
(T3x8)x2
(T3x8)x2
RC Reflector