1. Introduction
13
Important:
Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency fluorescent lights
can disrupt remote control operation.
1. Be sure nothing obstructs the path between the remote control and the projector. If the path between re-
mote and projector is obstructed, you can bounce the remote signal off certain reflective surfaces such as
projector screens.
2. The buttons and keys on the projector have the same functions as the corresponding buttons on the re-
mote control. This user’s manual describes the functions based on the remote control.
Note:
* To turn off the projector, press the STAND-BY button twice.
To Next Page
Loading...
