8. Specifications
117
s Screen Trigger
When the projector is powered ON the screen trigger output sends a low voltage trigger to the screen controller and the
screen will go down. When the projector is powered OFF the screen trigger stops sending a low voltage trigger to the
screen controller and the screen will go up.
Note:
To use this feature, you must turn on the Screen Trigger function. See Screen Trigger on page 85 for more
information.
Note:
Screen controllers are supplied and supported by screen manufacturers.
Note:
Do not use this jack for anything other than intended use. Connecting the wired remote control to the
SCREEN TRIGGER Mini Jack causes damage to the remote control.
To Next Page
Loading...
