5. Using On-Screen Display
57
o Menu Tree
The gray shaded areas indicate factory default settings.
MENU ITEM
Input Computer 1, Computer 2, Computer 3, Component, Video, S-Video
Test pattern
CrossHatch, Raster(0%), Raster(25%), Raster(50%), Raster(100%), Raster Red, Raster
Green, Raster Blue, Raster Blue 60, Gray Raster 10, Gray Raster 30, Ramp H, Ramp V
Adjust Image Image select High-bright/Presentation/Video/Movie/Graphic/sRGB
Detail setting Basic Reference
High-Bright/Presentation/
Video/Movie/Graphic/sRGB
Gamma Dynamic/Natural/Black detail
Color
temp.
5000K/6500K/7800K/
8500K/9300K/10500K
Brilliant color 1 to 3
White balance Red 1 to 100
Green 1 to 100
Blue 1 to 100
Contrast R 1 to 100
Contrast G 1 to 100
Contrast B 1 to 100
Color correction
Red, Green, Blue,
Yellow, Magenta, Cyan
–60 to 60
Contrast 0 to 100
Brightness 0 to 100
Sharpness 0 to 31
Color 0 to 100
Tint 0 to 100
Reset
Image
options
Screen
4:3/16:9/Side cut/True/Normal
Overscan 0%/5%/10%/15%
PC Adj.
Horizontal ±50
Vertical ±25
Total dots ±50
Fine sync 0 to 63
Video Noise reduction Off/Low/Mid/High
3D Y/C separation Off/On
Progressive Off/Still/Normal/Movie
Color matrix Auto/RGB/SDTV/HDTV
Motion adaptive mode Motion adaptor/Field Jam/Scaled Field/Mixed Mode
Film Off/2-2/2-3 Auto/2-2 On/2-3 On
Volume 0~61
Setting Basic Keystone
Horizontal
Vertical
Lamp control Normal/Eco
Lamp mode Dual/Lamp1/Lamp2
Lamp Interval Off/1 week/4 week/2000H
Simple menu On/Off
Language
English/Deutsch/Français/Italiano/Español/Svenska/Ⱬⶲ儤/ᒳⰍ
To Next Page
Loading...
