4. Convenient Features
49
Correcting Keystone by Using the Remote Control
IMPORTANT:
When adjusting the keystone, place the projector in the following position.
x Horizontal: set to the lens center
x Vertical: set to the maximum top
1.
Press the Keystone but-
ton to display the
Keystone window.
2.
Adjust the Horizontal
and Vertical sliding bars
using the select ŸźŻŹ
buttons.
3.
Adjust the slide bars until
the screen trapezoid is a
regular shape (see dia-
gram).
4.
Press Cancel to return to
the projected image.
To Next Page
Loading...
