n Using the Menus
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change various settings.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to navigate and make changes to the OSD. The
following illustration shows the corresponding buttons on the remote control and on the projector.
1.
To open the OSD, press the Menu but-
ton on the OSD control panel or remote
control. There are six initial menus.
Press the cursor Ÿorź buttons to
move through the initial menus and
Select to enter the desired menu.
To Next Page
Loading...
