5. Using On-Screen Display
87
Remote control
This projector has eight different remote control codes; the factory set normal mode (Code 1) and the other seven codes
(Code 2 to Code 8). This switching function prevents remote control operation mixture (jam) when operating several projec-
tors or video equipment together.
To change the code of Projector:
To change the Remote control code of the projector used in ON SCREEN MENU is selectable from Code 1 to Code 8.
Message
This option turns on or off messages. Even though selecting [Off], the following message will appear. “Projector is locked”
when the projector security is unlocked, the message will disappear.
To Next Page
Loading...
