Sanyo PLC-SU51

22
Basic Operation
ON - OFF
POWER
A
UTO SET UP
INPUT
WARNING
LAMP
REPLACE
SELECT
MENU
V
O
L
U
M
E
–
V
O
L
U
M
E
+
Top Control
Menu bar Pointer
(red frame)
Menu icon
Item data
Press the Point
7 8 buttons
to adjust value.
SELECT
button
Pointer (red frame)
Press the Point d button to
move the pointer.
Item
How to Operate the On-Screen Menu
MENU button
SELECT button
POINT button
(outer ring)
On-Screen Menu
Quit to exit this menu.
The projector can be adjusted or set via the On-Screen Menu.
Refer to the following pages regarding each adjustment and
setting procedure.
Press the Point 7 8 buttons to select a Menu icon to adjust.
Press the Point ed buttons to select an item to adjust.
Press the SELECT button to show the item data. Press the
Point 7 8 buttons to adjust the data. Refer to the following
pages for respective adjustment.
Press the MENU button to display the On-Screen Menu.
✔Note:
The selected item is not in effective until the SELECT button is pressed.
1
2
3
SELECT button
POINT button
Remote Control
MENU button