To Next PageTo Next Page
Need help?Do you have a question about the Sanyo PLC-WTC500AL and is the answer not in the manual?
General| Matrix size | 0.95 \ |
|---|---|
| Matrix type | 3-panel (p-Si TFT active) |
| Projection distance | - m |
| Vertical scan range | 50 - 100 Hz |
| Horizontal scan range | 15 - 100 kHz |
| Projection technology | LCD |
| Contrast ratio (typical) | 3000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | WXGA (1280x800) |
| Projector brightness (economic mode) | 4000 ANSI lumens |
| Audio input | 2 |
| Aspect ratio | 16:10 |
| Dimensions (WxDxH) | 451 x 550 x 175 mm |
| Focal length range | - mm |
| HDCP | No |
| Noise level | 36 dB |
| Noise level (economic mode) | 32 dB |
| Dot clock scanning frequency | 140 MHz |
| Lamp type | NSH |
| Lamp power | 330 W |
| Lamps quantity | 2 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 3000 h |
| USB connector type | USB Type-B |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Supported video modes | 1080i, 480i, 480p, 576i, 576p, 720p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 720 x 400, 1280 x 1024 (SXGA), 1280 x 768 (WXGA), 1280 x 800 (WXGA), 640 x 480 (VGA), 800 x 600 (SVGA) |
| RMS rated power | 6 W |
| Product color | White |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 440 W |
| Power consumption (economy mode) | 400 W |
| Storage temperature (T-T) | -10 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 451 mm |
| Height | 175 mm |
| Weight | 14700 g |
