1 / 1
2009/05/07
PLC-WTC500L IR Command List
□ Transmission format of LCD projector operation key
: NEC Format (single command / command pipelining mode)
□ Transmission format of PC mouse operation button (mouse cursor button) / L / R key
: Interlink Mouse Code Format (Includes 3 bit of ID)
□ Format for the transmission of OSD Laser operation button (mouse cursor button)
: Interlink OSD Mouse Code Format (Includes 3 bit of ID)
□ Custom Code + Custom Code
: 8 patterns as below
33h+00h(Default; code1),33h+11h(code2),33h+22h(code3),33h+33h(code4),
33h+44h(code5),33h+55h(code6),33h+66h(code7),33h+77h(code8)
Key
No.
Data Code
(HEX)
Function
S1 *1 L-CLICK ※ Back-side Click Trigger Key
S2 11 ON
S3 10 OFF
S4 38 INPUT 1
S5 39 INPUT 2
S6 06 INPUT 3
S7 89 AUTO PC
S8 43 FREEZE
S9 16 INFO
S10 8C CURSOR UP
S11 1E CURSOR LEFT/VOLUME -
S12 1D CURSOR RIGHT/VOLUME +
S13 8D CURSOR DOWN
S14 1C MENU
S15 0F SELECT
S16 *1 R-CLICK
S17 8A P-TIMER
S18 88 D. ZOOM
S19 82 SCREEN
S20 80 ZOOM
S21 87 FOCUS
S22 40 LENS SHIFT
S23 07 PIP
S24 5C PIP VOL
S25 5B KEYSTONE
S26 84/85 *2 LASER
S27 0B MUTE
S28 8B SHUTTER
SOB1 *1 Mouse Cursor button
*1･･･ Transmit code for Mouse *2･･･ Transmit code to set Laser Pointer / OSD Laser to ON/OFF
Need help?
General