Sanyo PLC-WXU700 - Page 40

-40-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
8 A05_B
26
0-31
9 300_R
130
0-255
10 700_G
130
0-255
11 B00_B
130
0-255
Group
106
Panel Service(62334)
0 VMID
178
0-255
1 VREF_R
242
0-255
2 VREF_G
242
0-255
3 VREF_B
242
0-255
Group
200
Option
0
Logo Prohibition (Forced No
Brand)
Logo Prohibition (0: Menu, 1: Forced,
2: China, 3-9: not used)
0 0 - 2 Effective after AC On
1 RS232C Baudrate Baud Rate 0 0 - 2
0: 19200bps, 1: 9600bps, 2:
115200bps
3 Shipping Setting 0 0 - 10
Default set when the value is set to
10
4 CABLE SW Long Cable 0 0 - 10 0: Disable, 1: Enable
5
PW Debug Command
Enable
0 0 - 1
0:Disable (Serial Command Eanble)
1: Enable (PW Debug Mode)
6 Device Refresh Disable 0 0 - 1
0:Enable, 1:Disable
No last memory
30 Lamp life test enable 0 0-1
0:Disable 1:Enable, for safety test
only
31 Lmap On time(for life test) For test purpose 2 1-720
32 Lamp Off time(for life test) For test purpose 2 1-720
33 Lamp total time(for life test) For test purpose 0 0-32767
50 Lamp Replacement Display Lamp Warning Display On / Off 1 0 - 1 1: On, 0: Off
51 Filter Warning Display Filter Warning Display On / Off 1 0 - 1 1: On, 0: Off
52 Lamp Counter reset Times Reset Times of Lamp Counter 0 0 - 255 Read only
54
Factory Default Execute
Times
Reset times of Fanctory Default 0 0 - 255 Read only
55 Motor Disable Motors Disable 0 0 - 1 0: On, 1: Off
56 Menu Position Move menu (X asis) 0 0 - 1024
57 Menu Position Move menu (Y asis) 0 0 - 1024
58 Lamp Go Out n/a 0 - 1
60 Lanuage Default setting 0:English(Default) 1:Janpanese 0 0 -1 Set default language
63 Souce Search Enable Source Search Enable 1 0 -1 0: Disable 1:Enable
71
Component ADC Device
Select
0: ISK51002, 1:PW392 AFE 0 0 - 1
80 Determination Setting 0: English 1: Japanese 0 0 - 1
90 Panel Life Mode 0 : On 1: Off 1 0 - 1
100 Disable Auto Picture Control
0: Normal operation
1:Auto Picture Control
- 0 - 1
Group
201
Option (signal)
0 FrameLock Option 1 0 - 1
0: FrameLockOFF at PC signal
1: FrameLockON at PC signal and
47Hz (Vfreq) - Panel frequency of
input signal
1 VSBEG VSBEG Setting 1 0 - 1
Group
202
Option (MCI model only)
0 Memory Viewer OSD
Memory Viewer OSD Display (1: Yes,
0: No)
1 0 - 1
1
Wireless Simple mode
Channel No.
Channel No.selecting in Wireless
Simple mode.
11 0 - 11
10 WPS mode select
0: Disable 1:WPS Push Button
2: WPS PIN Code select
0 0 - 2
11
WPS Push Button/WPS PIN
code auto setting
0 0 - 1