Sanyo PLC-WXU700 - Page 46

-46-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
1 Frequency Step Frequency Steps of TotalDot 1 0-3
2 Frequency Threshold Total Dot Freqency Threshold 5 0 - 10 0 [] <--- -----> 10[Not matched]
3 Fine Phase Do Phase Adj after Total Dot Adj. 1 0 - 1
0: Executes Fine Phase, 1: Not
Execute
4 BLKDET Black Level Detection Area 1 0 - 3
5 PHASEMSK Phase Detection Filter 0 0 - 3
0: Effective All Bit,
1: Disable Lower 1 bit
2: Disable Lower 2 bit, 3: Disable
Lower 3 bit
Group
290
PanelType * Panel Type Check
0 GammaL/R-View Current Setting Check 0 0-20
0: Gamma for L-Turn
20: Gamma for R-Turn * Read only
1 GammaL/R-Change Setting of Gamma 10 0-20
Sets L-Turn Gamma if the Value is
set to 0.
Sets R-Turn Gamma if the Value is
set to 20.
Group
300
Closed capture
0 Caption Mode
Capture Mode:
OFF/CC1/CC2/CC3/CC4
0 0-5
1 Color Mode Color Mode 0 0-1
Group
500
Composite (NTSC) Composite / S-Video
0
1 Disp Dots 674 0 - 4095
2 H Back Porch 24 0 - 4095
3 V Back Porch 18 0 - 4095
4 Disp Line 454 0 - 4095
Group
501
Composite (PAL) Composite / S-Video
0
1 Disp Dots 6620 0 - 4095
2 H Back Porch 34 0 - 4095
3 V Back Porch 18 0 - 4095
4 Disp Line 542 0 - 4095
Group
502
Composite (SECAM) Composite / S-Video
0
1 Disp Dots 662 0 - 4095
2 H Back Porch 32 0 - 4095
3 V Back Porch 18 0 - 4095
4 Disp Line 542 0 - 4095
Group
510
SCART(480i)
0 TRotal DOts 858 0 - 4095
1 Disp Dots 664 0 - 4095
2 H Back Porch 117 0 - 4095
3 V Back Porch 41 0 - 4095
4 Disp Line 458 0 - 4095
5 Clamp 0 0 - 255
6 Clamp Width 0 0 - 255
25 (USB)Clamp 0 0 - 4095
26 (USB)Clamp Width 0 0 - 4095
Group
511
SCART (575i)
0
1 Disp Dots 648 0 - 4095
2 H Back Porch 144 0 - 4095
3 V Back Porch 64 0 - 4095
4 Disp Line 534 0 - 4095
5 Clamp 0 0 - 255
6 Clamp Width 0 0 - 255
25 (USB)Clamp 0 0 - 4095
26 (USB)Clamp Width 0 0 - 4095
Group
520
YCbCr (480i)
0 Total Dots 858 0 - 4095