Sanyo PLC-WXU700A Service Manual

Multimedia Projector
SERVICE MANUAL
Model No.PLC-WXU700A
U.S.A, Canada,
Europe, U.K, Asia
Original Version
FILE NO.
PRODUCT CODE
PLC-WXU700A
1 122 457 20 (KY7AE)
1 122 458 20 (LY7AE)
1 122 458 22 (LY7CE)
REFERENCE NO. SM5111153-00
Chassis No. KY7-WXU700A00
Match the Chassis No. on the unit's back cover with the
Chassis No. in the Service Manual.
If the Original Version Service Manual Chassis No. does not
match the unit’s, additional Service Literature is required.
You must refer to “Notices” to the Original Service Manual
prior to servicing the unit.

Sanyo PLC-WXU700A Specifications

General

Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Projector native resolution	WXGA (1280x800)
Resolution	3072000 pixels
Aspect ratio	16:10
RS-232 ports	1
Power requirements	100 - 240 V
Lamp type	NSH
Lamp power	275 W
Light source type	Lamp
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	31 dB
Power consumption (typical)	333 W
Power consumption (economy mode)	292 W