Sanyo PLC-XE50 - Menu Bar; How to Operate the On-Screen Menu

Basic Operation
Menu bar
Pointer
(red frame)
Menu icon
Item data
Press the Point 7 8
buttons to adjust the
value.
SELECT
button
Pointer (red frame)
Press the Point ed
buttons to move the
pointer.
Item
How to Operate the On-Screen Menu
On-Screen Menu
Quit
Exit this menu.
The projector can be adjusted or set via the On-Screen
Menu. For each adjustment and setting procedure, refer to
the respective sections in this manual.
Use the Point 7 8 buttons to select a Menu icon; use
the Point ed buttons to select an item.
Press the SELECT button to show the item data. To
adjust the data, use the Point 7 8 buttons. Refer to the
relevant pages for more details about each adjustment.
To close the On-Screen Menu, press the MENU button
again.
Press the MENU button on the remote control to
display the On-Screen Menu.
✔Note:
• The selected item is not active until the SELECT button is
pressed.
1
2
3
SELECT button
POINT buttons
Remote Control
MENU button
21