Sanyo PLC-XF30 - Page 9

-9-
A
A
B
B
B
B
C
C
C
C
C
C
C
Cabinet front bottom
Cabinet front top
Cabinet front
Hook
Hook
(a)
(a)
Mechanical
disassemblies
Lamp-ballast-1
Panel-ballast
Lamp-ballast-2
A
A
A
A
A
B
B
B
B
B
B
B
B
Black color
White color
No mark and clear tube.
Black mark and clear tube
or no mark and black tube.
Lamp-ballast-1
Lamp-ballast-2
Figure (a)
K7A3
K7B3
K7B4
K7A4
1. Remove 5 screws A and remove the Panel ballast.
2. Remove the connectors. Remove 8 screws B and
remove the 2 Lamp ballast assemblies.
Note : To connect the connector.
Be careful to connecting the connec-
tors of the Lamp ballast assemblies.
Refer to the figure-(a).
Note :
Be careful not to damage Hook. The
cabinet-front-bottom is being fixed
with cabinet-front-top by hook.
1. Remove 2 screws-A. Push part(a) and pull
the Cabinet-front-bottom down.
2. Remove 4 screws B and remove the Cabinet
front top.
3. Remove 7 screws C and remove the Cabinet
front.
1.
Panel ballast and Lamp ballast
Assemblies removal.
2.
Cabinet front bottom, Cabinet
front top and Cabinet front
removal.