Sanyo PLC-XM100 Command List

1/1
PLC-XM150/XM100 IR Command List
□ Transmission format of LCD projector operation key
: NEC Format (single command / command pipelining mode)
□ Transmission format of PC mouse operation button (mouse cursor button) / L / R key
: SMK Mouse Code Format (Includes 3 bit of ID)
□ Custom Code + Custom Code
: 8 patterns as below
33h+00h(Default; code1), 33h+11h(code2), 33h+22h(code3), 33h+33h(code4),
33h+44h(code5), 33h+55h(code6), 33h+66h(code7), 33h+77h(code8)
Key
No.
Data Code
(HEX)
Function
S1 *1 L-CLICK ※ Back-side Click Trigger Key
S2 11 ON
S3 10 STAND-BY
S4 05 INPUT
S5 89 AUTO PC
S6 16 INFO
S7 1C MENU
S8 82 SCREEN
S9 8B SHUTTER
S10 8C CURSOR UP
S11 1E CURSOR LEFT / VOLUME -
S12 1D CURSOR RIGHT / VOLUME +
S13 8D CURSOR DOWN / MUTE
S14 38 INPUT 1
S15 84 POINTER
S16 *1 R-CLICK
S17 39 INPUT2 (Number 1)
S18 88 D.ZOOM (Number 2)
S19 8A P-TIMER (Number 3)
S20 06 INPUT3 (Number 4)
S21 5B KEYSTONE (Number 5)
S22 43 FREEZE (Number 6)
S23 47 ZOOM + (Number 7)
S24 4A FOCUS + (Number 8)
S25 40 LENS SHIFT (Number 9)
S26 46 ZOOM -
S27 4B FOCUS - (Number 0)
S28 1A FILTER
S29 OF / *1 SELECT / Mouse Cursor button
*1･･･ Transmit code for Mouse

Sanyo PLC-XM100 Specifications

General

Vertical scan range	48 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	1000:1
Projector native resolution	XGA (1024x768)
Aspect ratio	4:3
RS-232 ports	1
Dimensions (WxDxH)	497.8 x 375.9 x 165.1 mm
Lamp type	NSH
Lamp power	275 W
Light source type	Lamp
Focus	Manual
RMS rated power	7 W
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	31 dB

Weight and Dimensions

Weight	9661.5 g