Sanyo PLV-Z700 - Page 35

- 35 -
R
L
2
LCD panel / prism ass'y removal.
1. Remove the Shield Light Plate upward.
2. Remove the 4 screws-A (M2.5x4) and remove the LCD panel / prism ass'y.
LCD panel / prism ass'y (Type-R)
A
A
A
A
LCD panel / prism ass'y
Panel Type Check
There are 2 types combination of the LCD Panel/Prism Ass'y and the optical unit, named Type-L and Type-R.Since both have no
compatibility, each type should be combined with the same type, and the specificparts should be used. If not, the poor optical
characteristics may degrade the quality of a projected image.
LCD panel / prism ass'y (Type-L)
Optical disassemblies
Shield Light Plate