To Next PageTo Next Page
Need help?Do you have a question about the Sanyo Projector and is the answer not in the manual?
FCC notice on Class A device compliance and potential radio interference.
Warning about Class A product causing radio interference in domestic environments.
Cautionary advice for network projector use, including power cable removal on failure.
Disclaimer regarding data loss or damage from network function use.
Specifies system, CPU, memory, disk space, etc. for network operation.
Details data communication standards and protocols for the LAN terminal.
Describes Ethernet cable types and maximum lengths for network connections.
Outlines the steps for setting up and operating the projector via network.
Connects the projector to the LAN terminal using a LAN cable.
Details wired LAN network settings via projector menu and web browser.
Sets a PIN code to restrict network access to the projector.
Displays current LAN setting environment of the projector.
Resets all wired LAN settings to factory default.
Covers logging in, navigating the main page, and using various setting input methods.
Includes initial setup, language, PIN code, and PJLink settings.
Detailed steps for setting IP address, subnet mask, gateway, and DNS.
Configuration for email alerts and SNMP monitoring of projector status.
Controls power and displays operational status, temperatures, and warnings.
Configures input sources, signal systems, and fine-tunes image parameters.
Adjusts PC signal for optimal display and configures screen and lens settings.
Covers detailed settings, status info, and indicator meanings.
Illustrates different network connection scenarios for projector setup.
Guides on controlling the projector via Telnet command-line interface.
Details JavaScript and proxy settings for various browsers (IE, Netscape, Safari).
Addresses common installation, operation, and troubleshooting issues.
General