46
Chapter 4 Controlling the Projector
Indication of the lamp status
Icon display/background Status
White/Blue
Lamp on (Normal)
White/Red
Lamp on (Lamp is being used over a specified use time, replace lamp
immediately)
Gray/Blue
Lamp off (Normal)
Gray/Red
Lamp off (Lamp is being used over a specified use time, replace lamp
immediately)
Red/Blue with X
Lamp failure (Lamp failure, check lamp condition)
Red/Red with X
Lamp failure (Lamp failure and lamp is being used over a specified use
time, replace lamp immediately)
Icon display/background Status
Blue
Good condition.
Yellow/Gray
Filter is almost clogged.
Red/Gray
Filter is clogged. Replace a filter with new one.
* When the projector cannot decode the return from the AMC unit, this
icon also appears.
Indication of the filter status
To Next Page
Loading...
