10
7. TROUBLESHOOTING
7-1. Check before and after troubleshooting
7-1-1. Check power supply.
●
Check that voltage is in specified range (±10% of the rating).
●
Check that power is being supplied.
7-1-2. Check lead wires and connectors.
●
Check that coating of lead wires is not damaged.
●
Check that lead wires and connectors are firmly connected.
●
Check that wiring is correct.
Hazardous voltage can cause ELECTRIC SHOCK or
DEATH. Disconnect power or turn off circuit breaker
before you start checking or servicing.
To Next Page
Loading...
