Sanyo SCP-7050 User Manual

140 Section 2H: Using Your Phone’s Voice Services
Setting Up Screen Call
This feature enables you to screen incoming calls by using a
recorded announcement, either one that is prerecorded or
one that you have recorded. You can also record the caller’s
message into the Voice Data list.
Activating Screen Call
To start Screen Call when you have incoming calls:
©
When the phone rings or vibrates, select Options (right
softkey)
> Screen Call.
To set Auto Screen Call:
1. Select > Tools > Voice Memo > Screen Call > Auto.
2. Select On.
3. Set the answer delay by using numeric keys or by
pressing the navigation key up or down.
4. Select OK (left softkey). (The icon is displayed on the
standby display.)
Selecting an Announcement for Screen Call
To select a Screen Call announcement:
1. Select > Tools > Voice Memo > Screen Call >
Announcement
.
2. Depending on your preference, select Pre-Recordedor
Custom.
Tip:
While the caller’s message is being recorded, press TALK to
answer the call, or press EN
D
to stop recording and disconnect
the call.

Sanyo SCP-7050 Specifications

General

Brand	Sanyo
Model	SCP-7050
Category	Cell Phone
Language	English