Sanyo SCP-7050 - Adding a New Contact to Your Personal List

156 Section 2I: Using Sprint Ready Link
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Sprint Ready Link contact:
1. Press .
2. Select Go to (left softkey) > Personal List > <Add Contact>.
3. Enter a name for the new contact and press . (This is
the name you will see when calling or receiving a call
from the contact.)
4. Select R-Link Number, enter the contact’s 10-digit
Sprint Ready Link number (the contact’s wireless phone
number), and press .
5. Select Save (left softkey) to save the new contact to your
Personal List.
Tip:
You are not allowed to use the following symbols during step 3:
@ : ; / * ) (.