Section 2A: Phone Basics 41
3. Enter additional numbers.
4. Press to dial the number.
– or –
Select
Options (right softkey) > Save Phone# to save the
number in your Contacts.
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. It allows you to
dial a number by entering the last three to six digits of the
number. This feature becomes available when you enable
Abbreviated Dialing feature. (See “Setting Abbreviated
Dialing” on page 79.)
To place a call using Ph.Book Match Abbreviated Dialing:
1. Enter the last three to six digits of a Contact entry’s
phone number saved in your Contacts.
2. Press .
To place a call using Prepend Abbreviated Dialing:
1. Enter the last four or five digits of your desired phone
number
.
2. Press .
Tip:
You can also place a call by selecting Options (right softkey)>
Abbrev. Dial after step 1 above.
Note:
If the digits match more than one entry, the Abbrev. Dial list
will be displayed; select the correct entry and press TALK again.
Note:
When dialing a number with a hard pause, press TALK to send
the next set of numbers.
Phone Basics