Section 2I: Using Sprint Ready Link 147
v
R-Link Incoming shows the last 20 different Sprint Ready
Link calls that you accepted.
v
R-Link Missed shows the last 20 Sprint Ready Link calls that
you missed.
Making a Sprint Ready Link Call
(One-to-One Call)
You can place a one-to-one Sprint Ready Link call by entering a
Sprint Ready Link number or by selecting a contact from the
Sprint Ready Link List.
To place a Sprint Ready Link call by selecting a contact:
1. Press .
2. Select Go to (left softkey), and then select the list from
which you want to place a call (
Company List,
Personal List, R-Link Outgoing, R-Link Incoming,
or
R-Link Missed).
3. Scroll to the contact you want to call, and press and
hold to place the call and get the floor. (You will
see “R
-Link calling...” and “Connecting...” followed by
“You have floor.” You can now begin speaking.)
– or –
Scroll to the contact you want to call and press and
release to place the call. (The call will connect as
described above, but “Floor is open”will be displayed on
the screen. Either you or your contact may press and
hold to take the floor and speak.)
Tip:
You can also select Enter R-Link# from the Go to option to
enter a Sprint Ready Link number directly. (See page 150 for
details.)
Sprint Ready Link
To Next Page
Loading...
Need help?
General
