22 2A. Phone Basics
In-Call Options
Pressing OPTIONS (right softkey) during a call displays a
list of available in-call features.
䢇 Transfer Audio to switch the call to a Bluetooth device
(if applicable).
䢇 Save to save the current call’s phone number in your
Contacts.
䢇 Contact Details to display information about the caller
stored in your Contacts.
䢇 Main Menu to display the phone’s main menu.
䢇 3-Way Call to open a call with two other parties.
䢇 Contacts to display your Contacts list.
䢇 Voice Memo to record the other party’s voice.
䢇 Phone Info to display information about your phone.
䊳 Press the volume button up or down to adjust the
receiver volume.
䊳 Press MUTE or UNMUTE (left softkey) to switch
between the mute or unmute mode. (Muting
applies to your voice, not the other party’s.)
䊳 Press to turn the speaker on. Press again to
turn it off.
End-of-Call Options
After you have finished your call, the phone will display
an end-of-call message. “Call ended” and the duration
of the call will alternately flash beneath the caller’s
name (if already in your Contacts) or the caller’s
number (if available). Press any key below to select an
option; press any other key to stop the end-of-call
display.
䊳 Press to call a highlighted entry.
䊳 Press to display all history for a highlighted
entry.
䊳 Press OPTIONS (right softkey) to display the Recent
History options. (See “History Options” on page 52
for details.)
䊳 Press SEND MESSAGE (left softkey) to send a text,
picture, or SMS voice message.
䊳 Press to return to standby mode.
WARNING
Because of higher volume levels, do not
place the phone near your ear during
speakerphone use.
To Next Page
Loading...
Need help?
General
