24 2A. Phone Basics
To dial or save phone numbers with pauses:
1. Enter all or part of a number.
2. Press OPTIONS (right softkey) > Hard Pause or
2-Sec. Pause.
3. Enter additional numbers.
4. Press OPTIONS (right softkey) > Save > New Entry or
Existing Entry to save the number in your Contacts.
(See steps 3 and 4 in “Saving a Phone Number”
on page 23.)
– or –
Press to dial the number.
5. Press to send the additional number
if you selected
Hard Pause in step 2.
Dialing From the Contacts List
1. From standby mode, press CONTACTS (right
softkey).
2. Highlight the entry you want to call.
3. Press to dial the entry’s default phone number.
– or –
Press the navigation key left or right to show
another number for the entry and press .
Plus (+) Code Dialing
When placing international calls, use Plus Code Dialing
to automatically enter the international access code for
your location. (This feature is subject to network
availability.)
1. Press and hold to display “+” on your phone
screen.
2. Dial the country code and phone number you’re
calling, and press . The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.
To Next Page
Loading...
Need help?
General
