Sanyo Sprint SCP-3810 - Parental Controls

46 2B. Settings
Changing the Lock Code
1. Press > Settings > Lock Phone or Reset/Delete.
2. Enter your lock code and press CONTINUE (left
softkey).
3. Select Change Lock Code.
4. Enter your new lock code, and then press
CONTINUE (left softkey).
5. Re-enter your new lock code, and then press SAVE
(left softkey).
Each time you change the lock code, you will be
prompted whether to create a lock code hint. Press
YES
(left softkey) or
NO (right softkey) when prompted.
To display or edit the lock code hint:
䊳 Press > Settings > Lock Phone > Lock Code Hint.
Parental Controls
This feature allows parents to prevent children from
using certain functions on the phone.
Activating Parental Controls
1. Press > Settings > Parental Controls > On/Off > On.
2. Enter your new code, and then press CONTINUE
(left softkey).
3. Re-enter your new code, and then press SAVE (left
softkey).
Repeat the procedure above with each change from
Off to On. Also, while set to On, a user will be required to
enter the current code to access the Parental Controls
menu.
Changing the Parental Control Code
1. Press > Settings > Parental Controls > 
Change Parental Control Code.
2. Enter your new code, and then press CONTINUE
(left softkey).
3. Re-enter your new code, and then press SAVE (left
softkey).