– 20 –
5. AWB Adjustment
Preparation:
POWER switch: ON
Setting of pattern box:
Color temperature: 3100 ± 20 (K)
Luminance: 900 ± 20 (cd/m
2
)
Adjusting method:
1. Set a distance of 0.5-1.0 cm between the pattern box and
the camera. (Do not enter any light.)
2. Double-click on the DscCalDi.exe.
3. Click the AWB, and click the Yes.
4. AWB adjustment value will appear on the screen.
5. Click the OK.
AWB adjustment value determination is effectuated using the
“CHECK", “CHECK_ND”, "MS", “MS_M”, “MS_C”, “MS_C2”,
“IRIS_PWM1”, “IRIS_PWM2”, “IRIS_PWM3”, “IRIS_PWM4”
and “IR_TEMP_AD” values. If
CHECK = wc0, wc1, wc2
CHECK_ND = wnc0, wnc1, wnc2
MS = ms1, ms2
MS_M = ms3, ms4
MS_C = ms5, ms6
MS_C2 = ms7
IRIS_PWM1 = s1, s2
IRIS_PWM2 = s3, s4
IRIS_PWM3 = s5, s6
IRIS_PWM4 = s7
IR_TEMP_AD = itad
the adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
wc0=128 ± 2, wc1=128 ± 2, wc3=130 ± 40
wnc0=128 ± 2, wnc1=128 ± 2, wnc3=130 ± 40
840<=ms1<=1140, 420<=ms2<=560,
660<=ms3<=900, 600<=ms4<=820,
540<=ms5<=740, 490<=ms6<=670,
460<=ms7<=620
0<=s1<=255, 0<=s2<=255, 0<=s3<=255, 0<=s4<=255,
0<=s5<=255, 0<=s6<=255, 0<=s7<=255
ms2<ms7<ms6<ms5<ms4<ms3<ms1
s1>s2>s3>s4>s5>s6>s7
250<=itad<=893
Adjustment values other than the above are irrelevant.
6. CMOS White Point Defect Detect Adjustment
Preparation:
POWER switch: ON
Adjustment method:
1. Double-click on the DscCalDi.exe.
2. Select “CCD Defect” on the LCD “Test”, and click the “Ye s”.
3. After the adjustment is completed, OK will display.
4. Click the OK.
Camera
Pattern box
(color viewer)
Dsc Calibration x
OK
AWB Results:
1:
WB=256,434,474
CHECK=128,128,116
WB_ND=254,438,485
CHECK_ND=128,128,117
IR_TEMP_AD=397
IRIS_PWM1=217,187
IRIS_PWM2=174,162
IRIS_PWM3=152,143
IRIS_PWM4=138
MS=963,528
MS_M=770,709
MS_C=646,593
MS_C2=552
Fno_FOR_ISO=-1
SS_FOR_ISO=-1
Copy
To Next Page
Loading...
