Sanyo VPC-HD1A - Connect Your Camera to a Computer

English 24
Connect your camera to a computer
1 Start your computer, and use the supplied USB interface cable to
connect the docking station to the computer.
h Connect the docking station’s USB/AV terminal to the computer’s USB
connector.
2 Press the ON/OFF button to turn the camera on, and set the camera
in the docking station.
h The USB Connection Screen appears on the camera’s monitor.
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
To AC adaptor
USB/AV terminal
Supplied dedicated USB interface cable
i Insert the plug with the [n] mark facing up.
To USB connector on the computer