Sanyo VPC-HD1A - Capturing and Playing Back Still Images; Shooting Single Shots

English 46
CAPTURING AND PLAYING BACK STILL IMAGES
Shooting single shots
1 Press the ON/OFF button to
turn the camera on.
2 Set the main switch to REC.
3 Press the still image shooting
button [ ].
1 Press the still image
shooting button halfway.
h The autofocus operates,
and the image is focused
(focus lock).
2 Continue to gently press
the still image shooting
button all the way.
h The shutter releases and
the image is captured.
h You can view the captured
image on the monitor by
keeping the still image
shooting button depressed
when you capture the
image (post-view
[page 125]).
F3.5
F3.5
1/40
1/40
F3.5
1/40
Main switch
Target mark
Shutter speed
Aperture
Still image shooting
button [ ]
12