Sanyo VPC-HD1A - Operation Buttons

33 English
OPERATION BUTTONS
The procedures to change the camera settings, choose images, etc., are
performed by using the SET button to control the monitor display. This
operation is used very frequently, so it is best to become familiar with it right
away.
PHOTO RESOLUTION
2592x1944 (5M-S)
VIDEO CLIP MPEG4
640x480 30fps SHQ
SCENE SELECT
FULL AUTO
2 Press the MENU button.
h The Menu Screen appears.
<Select the icon above or below>
1 Turn on the camera.
To select the icon above,
toggle the SET button up.
To select the icon below,
toggle the SET button down.
SET button
MENU button
2 Press the MENU button.
h The Menu Screen appears.
<Select the icon above or below>