Sanyo VPC-S600 - GETTING STARTED; Turning the Power On;Off

EN-21
GETTING STARTED
Turning the Power On/Off
 Press the power switch until the digital camera turns on.
 To turn the power off, press the power switch again.
Choosing the Screen Language
Follow the steps below to choose the desired language.
1. Rotate the mode dial to and turn your camera on by pressing the
power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller (T) to select [Language], then press the
button.
4. Use the four-way controller (ST) to select the language you want.
5. Press the button to confirm.
Power switch
Set-up1
Set-up1
Set-up1 Set-up2
Set-up2
Set-up3
Set-up3
Set-up2 Set-up3
Langu
Language
Da
te & Tim
te & Time
Beeper
Beeper
Format
Language
Date & Time
Beeper
For mat
Select :
Select :
Select :
En
Eng
lis
lish
English
m/d/y
m/d/y
Louder
Louder
m/d/y
Louder