EN-24
Using the LCD Monitor
Your camera is equipped with a 2.4” full color TFT LCD monitor to help you compose images, replay
recorded images/movie clips or adjust menu settings. The mode icons, text and numbers displayed on
the monitor may vary according to the current settings.
1. Rotate the mode dial to , , , , , or .
2. Press the power switch to turn on the power.
3. Compose your scene on the LCD monitor.
4. Press the shutter release button.
• The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
• To prevent your images from being blurred while pressing the shutter release button, always hold it
carefully. This is especially important when you are shooting under low lighting conditions, since your
camera may decelerate the shutter speed to ensure your images are properly exposed.
To Next Page
Loading...
