95 English
RECORDING MENU 2
ISO sensitivity setting
With the initial settings, the ISO sensitivity is automatically set according to
the brightness of the subject. However, the ISO sensitivity can be set to a
fixed setting.
HINT
i At the = setting, the ISO sensitivity is set automatically (video clip
recording: ISO 50 to 800; still image shooting: ISO 50 to 200).
i When the ISO sensitivity is set to z, video clips, as well as still images
captured during video clip recording, will be recorded at ISO -.
i By setting a higher ISO sensitivity, you can set faster shutter speeds and
capture images in darker locations, but noise in the captured images may
increase or the images may be irregular.
i By assigning an operation shortcut to the SET button (pages 126 and
130), you can change the ISO setting from the Recording Screen.
CAUTION
Does the image appear to flicker when recording a video clip?
i If recording a video clip under fluorescent lights with the ISO sensitivity set
to w or higher, a noticeable flicker may appear in the image.
To Next Page
Loading...
