EasyManua.ls Logo

Sanyo Xacti VPC-FH1 - Page 197

Sanyo Xacti VPC-FH1
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDICES
English 176
Exposure control
type
Programmable AE/Shutter speed priority AE/
Aperture priority AE/Manual exposure control
Exposure compensation available from the Shooting
Setting Screen (0 ±1.8 EV in 0.3 EV steps)
Light-measuring
mode
Multi-section measuring, center-weighted
measuring, spot measuring
Range Normal mode:
50 cm (19.69 in.) to infinity
Super macro mode:
1cm (0.39in.) to
1m (3.28ft.)
(Wide end only)
Digital zoom For shooting:
1× to approx. 10×
For playback:
1× to 62.5× (varies with resolution)
Shutter speed Still image shooting mode: 1/2 to 1/1,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp Q)
(During flash: 1/30 to 1/1,000 sec.)
Sequential shots mode: 1/15 to 1/1,000 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is set
to the lamp Q high sensitivity mode)
Sensitivity Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 800; still
image shooting: ISO 50 to 200)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, ISO 1600, and
ISO 3200 (switchable from Shooting Setting
Screen)
h Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
h Maximum ISO sensitivity up to 1600 equivalent
when Scene Select function is set to Q.
h Recorded at ISO 1600 in the video clip
recording mode, even if ISO sensitivity setting
is z.

Table of Contents

Other manuals for Sanyo Xacti VPC-FH1

Related product manuals