Sanyo Xacti VPC-FH1 - Playback Operations; Playing Back Video and Still Images

English 52
SETUP
1 Video stabilizer (page 92)
h Compensate for camera shake
during video clip recording.
2 Photo stabilizer (page 92)
h Compensate for camera shake
during still image shooting.
3 Focus range (page 93)
h Select the focus range that
corresponds to the distance to
the subject.
4 Focus area (page 94)
5 Light-measuring mode
(page 94)
6 ISO sensitivity (page 95)
h The indicated ISO value is the
standard output sensitivity.
7 Remaining battery power
indication (page 142)
\: Record with image
stabilizer on.
]: Record without image
stabilizer.
\: Shoot with image stabilizer
on.
]: Shoot without image
stabilizer.
*: The camera automatically
focuses on the subject with
a range of 50 cm (19.69 in.)
to infinity (normal).
-: The focus can be set
manually.
+: The camera focuses on the
subject within a range of
1 cm (0.39 in.) to 1 m
(3.28 ft.) (super macro).
B: 9-point range finder focus
C: Spot focus
X: Multi-section light
measuring
W: Center-weighted light
measuring
Y: Spot light-measuring
=: Sensitivity is set
automatically (video clip
recording: ISO 50 to 800;
still image shooting: ISO 50
to 200)
*: Sets sensitivity to ISO 50
u: Sets sensitivity to ISO 100
v: Sets sensitivity to ISO 200
w: Sets sensitivity to ISO 400
6: Sets sensitivity to ISO 800
-: Sets sensitivity to ISO 1600
z: Sets sensitivity to ISO 3200
(video clip recording:
ISO 1600)