Instruction Manual for MiniTRACE CSDF
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
08/2012 Page 7
• Count up mode (CNTUP): Pulses are counted during the selected time interval. The
interval can be set via the mode button. Possible intervals are: 60, 120, 300, 600,
1,800 and 3,600 seconds.
• Food mode: Contamination of food in “Bq/L”.
Note
: If you turn on the instrument the last selected operation mode is still activated.
The default calibration factors are set for a distance of 3 mm between grid and
surface. For more details see Chapter 3.
The MiniTRACE CSDF is UNABLE to identify radionuclides!
To Next Page
Loading...